background image

User’s Manual 

 

 

 

 

66 

 

-   

Dial-out DNS > 

The item allows user to specify the IP address of the Domain Name System 
(DNS) associated with the unit. To configure this item, DHCP must be set to 
<OFF>. 
 
Move the cursor over <Dial-out DNS> and press ENTER, and then press UP / 
DOWN keys to change the values in the selected field. 
 

-   

Phone Number > 

The item is used to set the dial-out phone number. Follow these steps to setup 
the phone number. 

  Select <Phone Number> from Dial-out Setup menu and press ENTER. A 

virtual keyboard displays.

 

  Use Direction keys to move the cursor for selecting number.   

  Press ENTER to add the selected number to the phone number entry field. 

  When done, press ENTER to save the settings and exit. 

 

-  

Dial-out Account > 

This item enables user to set the Dial-out user name, which is used for dialing 
out to Internet Service Provider server. Contact your network service provider 
for more specific information. 
 
To setup the Dial-out Account, follow the steps. 

  Select <Dial-out Account> from Dial-out Setup menu and press ENTER. A 

virtual keyboard displays.

 

 

Dial-out Account 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A B C D E F G H

I  J K L M

N O P Q R S T U V W X Y Z 

a b c d e  f  g h  i  j  k  l m

n o p q  r  s  t  u v w

x y z 

0 1 2 3 4 5 6 7 8 9 

! @

  _ 

   

 

 

 

 

 

 

 

 

 

 

   

  Backspace   Delete 

   Cancel  OK 

 

Summary of Contents for XDVR2





























































































































Reviews: