05
Safety Guideline
Extension Cables
CAUTION:
To avoid electric shock:
•
Do not use multiple socket adapters or power extension cables that bypass the ground wire or
disable grounding.
•
When using a power extension cable or a multiple socket adapter, make sure it is grounded and
has sufficient current rating. No more than one extension device at a time is recommended for
use.
•
If using a multiple socket adapter, take care when plugging the power cable, as some types
allow incorrect plugging which could result in permanent damage to the robot, as well as cause
possible electric shock and/or fire damage.
•
Do not plug the robot power cables into an electrical outlet if the power cable is damaged.
•
Do not connect or disconnect the power adapter with wet hands.
•
Plug the robot power cables only into properly grounded electrical outlets.
•
Do not use adapter plugs that bypass the grounding feature, or remove the grounding feature
from the plug or adapter.
•
If using an extension cable, make sure that the total ampere rating of the products plugged in to
the extension power cable does not exceed the ampere rating of the extension cable.
•
Use an extension cable or power board designed for grounded plugs and plugged into a
grounded wall outlet.
Working Area
•
Start from the default posture before turning on the robot.
•
When turned off, it is best to keep the robot in the default posture without the cable plugged
unless charging.
•
Before starting, make sure there is enough free space for operation. This requires a radius of at
least 60 cm (24 inches) around the robot to avoid obstacles.
•
Generally, leave at least 60 cm (24 inches) all around the robot to avoid damage. In particular,
ensure that all cabling is removed from the usable area.
•
The working surface must be dry and level; thick carpets or rugs are not recommended for
operational stability.
•
The robot is designed for indoor use only.
•
Keep the robot away from radiators, heat sources and direct sunlight.
•
Operating temperatures: between 0°C and 40°C (32°F to 104°F).
•
Operating humidity range: between 20% and 80%.
•
Do not leave the robot unattended on the floor.
