22
No Item
Description
9
Smart servo ID
Click to move the slide bar and change the smart servo’s actual position.
By default, the neutral position is set at 512. A reading of 0 sets the
desired position to 0° degrees, while a reading of 1023 defines a 330°
turn.
NOTE:
The function is only accessible when a project is connected and
a pose is selected.
10
Slide bar
Move the slide bar to manually adjust the actual position of the smart
servo.
NOTE:
A reading of 0 sets the desired position to 0° degrees, while a
reading of 1023 defines a 330° turn. The smart servo cannot
rotate outside of these parameters.
Operations
03
