P5
P5
Unpacking and Installation
Remove the packaging materials, top cover box, assessory box and plastic cover.
3
Move the printer to a table or plat-
form. (Do not move the printer by
yourself as it is heavy.)
1
Remove the plastic wrap and PP.
2
8
Remove the foam next to the guide screws on both sides, and then remove the foam under
the print bed.
Remove the tape on the
body (4 in total).
4
Open the front door. Remove
the tape from the supporting
materials and print bed.
6
Remove the foam on the
cartridge holder.
7
Open front door, remove the tape at mark printer door
post.
5
Remove the cable tie and foam in front and back of the front
door.
9
