P18
P18
Refer to the Change Filament function in the main screen
.
Unused filament for one day of longer should be stored in zip-lock bag.
Before turning on the printer and setting
up the WiFi network, please insert the
WiFi dongle into the USB port on the
top of printer.
D3
Filament
D4
WiFi
1. Tap ADD and the printer will
start to search for available
access points.
4. Confirm the connection is
completed.
2. Tap the access point to be
used.
3. Enter the password for the
access point.
Function Operation and Instructions
●
Use a USB cable to connect the printer to the computer and run the XYZmaker.
●
Check if the WiFi function is activated on the computer and connect to the access point.
PRINT:
Set printing parameters and quality.
If only a file conversion is needed, tap “PRE
-
PARE”.
DASHBOARD:
Monitor print head tempera-
ture, filament used and filament loading /
unloading.
3. When the software displays ”
READY
”, the
connection is established successfully.
Now, you can click on “DASHBOARD” to
monitor the printer or “PRINT” to print a
file
.
1
. Run the XYZmaker. Click on File > Print > da Vinci Printer Plugin.
2. Select the printer to be used.
Use the XYZmaker to verify if the WiFi connection is established successfully
