P10
P10
The 200 xTCS uses four color inks which can be replaced separately.
C. Ink Cartridge Installation
Function Operation and Instructions
1. Prepare several paper towels and the
ink cartridge.
2. Unpack the ink cartridge.
3. Remove the cartridge cover.
Ink Guidance
6. Check if the ink transferred to the
paper towel displays two straight lines.
If so, ink guidance is successfully
completed. Once ink guidance is done,
install the ink cartridge.
4. Press the cartridge head against the
paper towel to transfer some ink onto it.
5. If the ink did not transfer well, try
putting the paper towel on the table and
hold the ink pressed on the paper towel.
7. If the ink did not transfer well, please
wet the paper towel with 75% Alcohol to
wipe the ink. After you clean the inkjet,
check to see if the ink transferred.
To prevent the opened ink cartridge from drying out when a print is
finished or the printer will be idle for days, follow the procedure to store
the cartridge:
1. Clean the nozzle of the ink cartridge with alcohol.
2. Seal the ink cartridge with the protective cover, and store the cartridge
in room temperature at 15 ~ 35 degree.
For the best print quality, clean the nozzle of the cartridge with alcohol
after removing the protective cover from the cartridge, and then install the
cartridge back to the printer before the next print.
Note
