46
EN 5.10 SuSix Manual 2007
FW: 841013-005/843003-001
Turbidity and Suspended Solids Transmitter
Display Read-out, several connected units
When several MJK units are interconnected, for example an Oxix
®
dis-
solved oxygen transmitter and a SuSix
®
turbidity and suspended solids
transmitter with different names and Modbus ID numbers, a "Display Over-
view Menu" is available at top level (press "Back" repeatedly):
Specify main Screen
Datalogger
Password
Sensor name
Converter setup
Display setup
Back Select
OK
Login
Activate/deactivate
Set new password
Back Select
OK
Set log interval
0020 sec
Back Select >
Datalogger
Sensor name
Oxix 1
Back Select
>
Sensor name
Select line
Linie 1 - Sensor name
Linie 2 - Oxygen sat.
Linie 3 -
Linie 4 -
Linie 5
Back Select
OK
Specify main Screen
Converter setup
Language
Set Clock
Modbus
Factory settings
Display SW version
Back Select
OK
Display setup
Averaging
Units
mA output
Cleaning
High Alarm
Low Alarm
Sensor Error
Status
Factory settings
Service menu
Back Select
OK
Select line content
Not in use
Sensor name
Measurement
Temperature
Clock
Back Select
OK
Password
Type password
0000
Back Select
>
Set new password
0000
Back Select
>
Activate
Deactivate
Back Select
OK
Login
Activate/
Deactivate
Set new password
Oxix1
Oxygen
% SAT
Select Set up
Main Menu
Converter Overview Menu
Oxix1 91.9 %
Susix1
578 mg/L
Back Select Display
Display Overview Menu
Display setup
Sensor name
Aeration Tank Inlet
Back Select
>
Sensor name
GB Oxix menuer #1 Main menu
FW: 841013-009, 846001-002, 841513-009
Page 1 of 7 26. september 2008
All connected units are displayed and sorted by their ID numbers, and
consequently each unit can be selected and set up as required:
Specify main Screen
Datalogger
Password
Sensor name
Converter setup
Display setup
Back Select
OK
Login
Activate/deactivate
Set new password
Back Select
OK
Set log interval
0020 sec
Back Select >
Datalogger
Sensor name
Oxix 1
Back Select
>
Sensor name
Select line
Linie 1 - Sensor name
Linie 2 - Oxygen sat.
Linie 3 -
Linie 4 -
Linie 5
Back Select
OK
Specify main Screen
Converter setup
Language
Set Clock
Modbus
Factory settings
Display SW version
Back Select
OK
Display setup
Averaging
Units
mA output
Cleaning
High Alarm
Low Alarm
Sensor Error
Status
Factory settings
Service menu
Back Select
OK
Select line content
Not in use
Sensor name
Measurement
Temperature
Clock
Back Select
OK
Password
Type password
0000
Back Select
>
Set new password
0000
Back Select
>
Activate
Deactivate
Back Select
OK
Login
Activate/
Deactivate
Set new password
Oxix1
Oxygen
% SAT
Select Set up
Main Menu
Converter Overview Menu
Oxix1 91.9 %
Susix1
578 mg/L
Back Select Display
Display Overview Menu
Display setup
Sensor name
Aeration Tank Inlet
Back Select
>
Sensor name
GB Oxix menuer #1 Main menu
FW: 841013-009, 846001-002, 841513-009
Page 1 of 7 26. september 2008
or
Specify Main Screen
Data Logger
Password
Set Sensor Name
Converter Setup
Display Setup
Back Select
OK
Login
Activate/deactivate
Change password
Back Select
OK
Set log interval
0010 sec
Back Select >
Data Logger
Set Sensor Name
SuSix1
Back Select
>
Set Sensor Name
Select line
Linie 1 - Sensor name
Linie 2 - Meas.
Linie 3 -
Linie 4 -
Linie 5
Back Select
OK
Specify Main Screen
Converter Setup
Language
Set Clock
Modbus
Factory settings
Display SW version
Back Select
OK
Display Setup
Sensor Calibration
Averaging
Units
mA output
Cleaning
Solid curve
High Alarm
Low Alarm
Sensor error
Status
Factory settings
Service Menu
Back Select
OK
Select line content
Not in use
Meas.
Homogeneity
Solid curve
Clock
Back Select
OK
Password
Type password
0000
Back Select
>
Change password
0000
Back Select
>
Activate
Deactivate
Back Select
OK
Login
Activate/
Deactivate
Change password
SuSix1 [X]
Meas.
FTU
Select Setup
Main Menu
Converter Top Display
SuSix1 [X]
Meas.
FTU
Select Setup
Converter Top Display
Specify Main Screen
Data Logger
Password
Set Sensor Name
Converter Setup
Display Setup
Back Select
OK
Main Menu
SuSix1 [X]
Prim.
mg/l
Second 0.1%
Select Setup
1 - Main menus
Page1
Important:
More connected units can only by managed as described above, if
each unit have been assigned a unique name and Modbus ID num-
ber. See page
for details.
Display Keys
The keys and the soft keys (variable key functions determined by the
display firmware) are used for initial programming and normal operation of
the flow meter.
The function(s) of the four available keys is displayed at the bottom of the
display. The symbols and actual functions are described in detail in the
sections that describe the individual menus.
