82
EN 5.10 SuSix Manual 2007
FW: 841013-005/843003-001
Turbidity and Suspended Solids Transmitter
Modbus
The SuSix
®
is delivered with a standard Modbus RTU protocol, and up to
four SuSix
®
and/or MagFlux
®
converters can be connected for concurrent
operation.
Time format
24 hour
AM/PM
Back Select
>
Language
(GB) English
(US) English
Dansk
Deutsch
Español
Français
Italiano
Nederlands
Norsk
Suomalainen
Svenska
Back Select
OK
Cancel
Delete log
Restore default language
Restore factory setting
Back Select
OK
Change device addresse
Device 1
Back Select
OK
Add device
Change device addresse
Remove device
Change controller ID
Back Select
OK
Scanning
Back
Display 841013-002
SW July 14 2007 14:14:03
Language
841513-000
Back
Set clock
Language
Modbus
Factory settings
Display SW version
Add device
Devices found
Device 1
Back Select
OK
Change device addresse
Change device 1
Back Select
OK
Remove device
Device 1
Back Select
OK
Remove device
Language
Set clock
Modbus
Factory settings
Display SW version
Back Select
OK
Display Setup
Change controller ID
1
Back Select
OK
Number of controllers
1
Back Select
OK
Set clock
2007-08-18 10:53:12
Back Select
>
Language
Set clock
Modbus
Factory settings
Display SW version
Back Select
OK
Display Setup
Change controller ID
Susix 1 1.2 g/L
Susix 2
212 mg/L
Back Select Display
Display Overview Menu
Display configuration
2 - Display Setup
Page2
When several converters are to be added, it is necessary to change each
converter device address to a unique ID address before connecting the
converter to the Display Unit.
Add device
Four SuSix
®
Converters can be connected to one Display Unit using the
RS485 interface connection. Note that only one Display Unit can be used
with several converters.
The Display Unit can easily be moved to another converters for readout
and configuration.
1. Select "Add Device", click OK and wait for the scan process to finish.
2. The found converters are finally displayed.
