Operation Manual
63
Operation
4. Tilt and raise the boom until pivot pins have seated fully
in attachment hooks.
Fig 75. Tilt and Raise Boom To Seat Pivot Pins In Attachment Hooks
5. The attachment adapter should be tight against the rear
of the attachment.
6. Install the retaining pin to lock in attachment.
Warning
Hydraulic attachments have a maximum hy-
draulic pressure rating. Failure to make sure
the attachment is equipped with a pressure
reducing valve, or is rated to be equal or
slightly greater than 4,000 psi (276 bar), which
is the maximum pressure of the forklift auxiliary hydraulic
system at the quick-disconnect couplers, could result in
death or serious injury.
Make sure all hydraulic connections are tight (if equipped).
A
Fig 74. Drive Vehicle Forward To Align Pivot Pins with
Attachment Hooks
A
B
Fig 77. Retaining Pin
Fig 76. Attachment Engaged
7. Connect the quick attach couplers (Fig. 73). This only ap-
plies to attachments with a quick attach hydraulic system.
Fig 78. Quick Attach System for Hydraulic Systems
(A) Female Couplers, (B) Male Couplers
