Xtreme XR3034 Operation And Safety Manual Download

Page: 38 / 76

Operation Manual

Operator Cab

Travel Select Lever

The travel select lever has three (3) positions: FORWARD,

NEUTRAL, and REVERSE, which change the direction of travel.

Fig 26. Travel Select Lever

Controls and Indicators

Travel Select Lever

Position

Purpose

F (Forward) UP Position (away from the operator)
N (Neutral)

CENTER Position

R (Reverse)

DOWN Position (toward the operator)

The travel select lever automatically locks when it is in the

NEUTRAL position. The operator must raise and move the

travel select lever when changing to the FORWARD or REVERSE

position.

NOTE: The travel select lever must be in the NEUTRAL position

to start the reach forklift.

NOTE: The back-up alarm automatically sounds when the

travel select lever is in the REVERSE position, and the display

switches to the back-up camera view.

Gear Select Switch

The Gear Select switch has a twist grip handle with momentary

up and momentary down positions for six (6) forward and

three (3) reverse gears.

NOTE: Transmission gear range can also be changed on the

joystick with the Drive Speed thumb switch.

Fig 27. Gear Select Switch

Parking Brake Switch

The Parking Brake switch (A) has two (2) positions: ON and

OFF.

Fig 28. Parking Brake

(A) Parking Brake Switch Guard

(B) Parking Brake Indicator

Set Parking Brake switch (A) to ON (DOWN) to engage the

parking brake and to OFF (UP) to disengage the parking brake.

The parking brake indicator (B) illuminates when the parking

brake is set to ON (engaged) and the key is ON.

Load Capacity Charts

Load Capacity Charts are located on the left side of the front

control panel. Load Capacity Charts are provided to assist the

operator in determining how to safely handle loads with the

reach forklift, including boom angle, height, and reach.

Summary of Contents for XR3034













































































Search results

Summary of Contents for XR3034

Reviews:

Related manuals for XR3034

Brands by name

Popular brands

Xtreme XR3034, Operation And Safety Manual

Search results

Summary of Contents for XR3034

Reviews:

Related manuals for XR3034

Brands by name

Popular brands