Operation Manual
44
Operator Cab
Boom Control
Fig 45. Boom Control Handle
The boom control handle (Fig. 45) has variable motions from
the center position that control boom and tilt functions. It
is used to raise, lower, extend, retract the boom, and tilt the
carriage (or attachment).
NOTE: The boom control handle is a variable speed control.
Function speed is proportional to handle movement. The
more the handle is moved in the appropriate direction, the
faster the corresponding function will occur.
REGENERATION MENU
Pressing the ENTER button while in GAUGE DISPLAY mode or
pressing the REGEN MENU soft button will bring up a menu
that displays the exhaust system regeneration mode with the
available options. The operator may disable an automatic
regen or force a manual regeneration from this menu (a
manual regen can only be initiated if the system is requesting
it). Pressing the ENTER button will return to the GAUGE
DISPLAY mode.
Fig 43. Regeneration Menu
FAULT CONDITION POP-UPS
A fault condition may trigger a pop-up dialog box describing
the nature of the fault. A soft button may need to be pressed
to acknowledge the fault.
NOTE: Increasing engine speed can increase boom lift and
extend speed.
BACKUP CAMERA (OPTIONAL)
The display will automatically change to the backup cam-
era when the transmission is placed in REVERSE. When the
transmission is in NEUTRAL or FORWARD, the display can be
switched from the GAUGE DISPLAY to the BACKUP CAMERA
by pressing the lower left-hand soft button (above the MENU
button). Pressing the soft button again will return to GAUGE
DISPLAY.
Fig 44. Boom Control Handle
NOTE: Two (2) boom functions can be performed at the same
time by moving the handle into the corner between two (2)
functions. For example, moving the handle to the forward, left
corner will lower and retract the boom at the same time.
