Operation Manual
41
Operator Cab
Fig 34. Display Indicators
Operate” tags, and have a qualified mechanic service or repair
the forklift BEFORE placing it into service again.
Q. FUEL GAUGE AND LOW FUEL INDICATOR
The fuel gauge indicates the approximate quantity of fuel in
the tank. The total capacity of the fuel tank is 72 gallons (273
liters).
R. OIL PRESSURE GAUGE
The Oil Pressure Gauge indicates the engine oil pressure.
Normal engine oil pressure is between 40 and 80 psi. If the
Oil Pressure Gauge shows abnormal readings, stop the forklift,
follow proper shut down procedures, tag forklift with “Do Not
Operate” tags, and have a qualified mechanic service or repair
the forklift BEFORE placing it into service again.
S. STOP INDICATOR (RED)
The Engine Stop Indicator is displayed with a flashing Engine
Warning Indicator when the engine is either shut down or an
engine shutdown is imminent.
T. CHECK ENGINE/GENERAL WARNING INDICATOR
In case of any engine errors, the general error lamp of the
engine will be activated. Whenever the error lamp is active, a
fault code is stored in the error memory.
Two different states are possible:
•
Solid on
- Errors that allow continuing engine operation
with minor restrictions.
•
Blinking
- Errors that cause an engine shut down or shut
down request.
Emission related errors of the EAT system will also be dis-
played on the Status Display (Fig 34, “X”) and the malfunction
indicator will come on.
The Check Engine Indicator will be displayed when there is a
minor engine or ESC fault. Refer to the Operation section on
Warning Indicators and the Engine Indicator Chart (Fig. 67).
U. EXHAUST SYSTEM CLEANING (ESC) INDICATOR
The Exhaust System Cleaning (ESC) Indicator will be displayed
when a manual regeneration is recommended or required.
Refer to the Operation section on Warning Indicators and
the Engine Indicator Chart (Fig. 67).
A
B
C
D
E
F
G
H
I
J
L
M
N
O
P
Q
R
T
U
V
S
W
X
π
