Xtreme XR3034 Operation And Safety Manual Download

Page: 34 / 76

Operation Manual

An accessory outlet is provided as a power source for personal

items, such as a radio or cell phone. This outlet is 12vdc and

rated for 10 Amps maximum current.

Operator Cab

Warning

A brief description of controls, indicators, and

instruments is provided as a convenience for

the operator. These descriptions DO NOT pro-

vide complete operation instructions. Read

and understand the entire manual to prevent

death, serious injury, or equipment damage.

Ignition Switch

A key is required to operate the ignition switch.

Fig 11. Key and Ignition Switch

The ignition switch has three (3) positions: OFF, RUN, and

START.

Ignition Switch

Position

Purpose

OFF

Shuts down entire electrical system, except

the accessory outlet.

RUN

All controls and indicators are operable.

START

Engages starter motor to crank engine.

NOTE: The START position is spring-loaded. When the key is

released, the Ignition switch will automatically return to the

RUN position.

Accessory Outlet

Fig 12. Accessory Outlet

Accelerator Pedal

Press the accelerator pedal to increase engine speed. The ac-

celerator pedal is spring-loaded to return to idle speed.

Fig 13. Accelerator Pedal

Service Brake Pedal

Press the service brake pedal to slow or stop the forklift. The

service brake pedal activates the service brakes on all four (4)

wheels.

Summary of Contents for XR3034













































































Search results

Summary of Contents for XR3034

Reviews:

Related manuals for XR3034

Brands by name

Popular brands

Xtreme XR3034, Operation And Safety Manual

Search results

Summary of Contents for XR3034

Reviews:

Related manuals for XR3034

Brands by name

Popular brands