PROGRAM PATTERN submenu
This includes all the operations needed to program a pattern.
1)
Use the joystick to point the cursor to the "
PATTERN NUMBER
” option.
2)
Select the required pattern and press
OPEN
.
3)
Position the cursor under
“
PROGRAM PATTERN
” option and press the
OPEN
button.
The number of actions available (including zoom operations) for programming the
Pattern is shown in percentage form on the screen while they are each being
programmed. 100 operations are available for each pattern.
CLEAR PATTERN submenu
This includes the operations for deleting the selected pattern.
4.5.3.4.
POWER UP
POWER UP
---------------------------
1.
ACTION: NONE
2.
BACK
3.
EXIT
Screen 39: Power UP Sub-Menu
Option
Value
Explanation
ACTION
NONE
No action is performed at the end of power
up.
AUTO SCAN
The camera performs an auto scan at the
end of power up: the camera performs a
360 horizontal scan operation.
RANDOM SCAN
The camera performs a random scan at the
end of power up: the camera performs a
random
360°
scan
pausing
for
approximately
2” every 142°.
FRAME SCAN
The camera performs a frame scan at the
end of power up: the horizontal scan is
performed in the SET SCAN limits.
PRESET 1/ PRESET 8
The camera goes to preset 1 or 8 at the end
of power up.
PATTERN 1 ~ 4
The camera performs one of the 4 patterns
at the end of power up.
CRUISE
The camera performs a cruise at the end of
power up: the camera runs a cycle
consisting of up to 30 preset positions.
42 / 56
