SOFT DIP SWITCH
Program protocol, address, baud rate via OSD
menu.
DOME LABEL
Dome label setting submenu
DISPLAY SETUP
Display submenu: program the info to be
displayed on screen.
PASSWORD
Password submenu
BOOTUP SCREEN
Boot up screen submenu
POSITION MEMORY
ON/OFF
Remember the camera position of last power
off.
Table 4
4.5.1.1.
SOFT DIP SWITCH
The
SOFT DIP SWITCH
submenu is used to set protocol, address and baud rate
operated by OSD menu.
SOFT DIP SWITCH
---------------------------
1.
SOFT ADDR:
1
2.
SOFT ADDR ENABLE:
OFF
3.
SOFT PTOL:
PELCO-D/P
4.
SOFT BAUD RATE:
2400
5.
SOFT B.RATE/PTOL:
OFF
6.
BACK
7.
EXIT
Screen 4: Protocol Menu
Option
Value
Explanation
SOFT ADDR
0~255
Set the soft address
SOFT ADDR
ENABLE
ON, OFF
Enable the soft addressor not.
SOFT PTOL
DAHUA, PELCO-D/P
Set the protocol via OSD menu instead
of hard DIP switch
SOFT BAUD
RATE
1200, 2400,
4800,9600
Set the soft baud rate
SOFT
B.RATE/PTOL
ON, OFF
Enable the soft baud rate and protocol or
not.
Table 5
4.5.1.2.
DOME LABEL
19 / 56
