![XtendLan SDOMEOATM User Manual Download Page 47](http://html1.mh-extra.com/html/xtendlan/sdomeoatm/sdomeoatm_user-manual_3738088047.webp)
TRACKING
The camera performs tracking action at the
end of power up. This is only available for
the tracking ptzs.
Table 27
4.5.3.5.
CRUISE SETTING
CRUISE
-----------------------------
1.
DWELL TIME<SECS>: 5
2.
CRUISE TRACKING: OFF
3.
PRESET LIST:
1
1 ON 0 OFF
1234567890 <PRESET 1-10>
0000000000
4.
BACK
5.
EXIT
Screen 40: Cruise
The
CRUISE
function is used to make the camera run a cycle consisting of up to 30
preset positions.
This menu item is used to enable each of the preset positions used in the cruise cycle.
For the cruise cycle to be effective, the preset positions must be actually stored.
Option
Value
Explanation
DWELL
TIME
<SECS>
5 ~ 250
Duration (in seconds) of the dwelling time on
each presetting.
CRUISE
TRACKING
ON/OFF
Set tracking or not when the dome is cruising.
PRESET LIST
1 ~ 3
Value 1 selects the first group of Presets from
1 to 10, value 2 selects the second group
from 11 to 20, and value 3 selects the third
group from 21 to 30.
The following 10 digits (1/10) are used to
switch the corresponding preset in the
corresponding ten (1-10, 11-20, 21-30) either
on or off (1=
ON
; 0=
OFF
).
Table 28
43 / 56