RANDOM SCAN
The camera performs a random scan
at the end of the park time: the
camera performs a random 360
degree
scan
pausing
for
approximately
2” every 142°.
FRAME SCAN
The camera performs a frame scan at
the end of the park time: the
horizontal scan is performed in the
SET SCAN
limits.
PRESET 1/PRESET 8
The camera goes to preset 1 or
preset 8 at the end of the park time.
PATTERN 1 ~ 4
The camera performs one of the 4
patterns at the end of the park time
(command sequence continuously
performed).
CRUISE
The camera performs a cruise (preset
sequence) at the end of the park time:
the camera runs a cycle of up to 30
preset positions.
REPEAT LAST
The camera simply resumes the
operation it was performing before
being interrupted at the end of the
park time.
TRACKING
The camera performs a tracking
operation at the end of the park time.
This is only available on tracking ptzs.
SPEED SETTING
This submenu set the pan/tilt speed of
the scan
ZONES
Zone
parameter
programming
submenu
MANUAL LIMIT
ON/OFF
If the option is ON, horizontal
automatically scanning is performed
within the right and left scanning limits
open.
To set the left and right scanning limit,
position the camera at the required
pan angle and press
OPEN
to set.
The two angles must be at least 10
degrees apart.
A preset position may be called up
outside these scanning limits.
34 / 56
