1 / 56
1. SAFETY NOTES --- IMPORTANT!!!
The following important notes must be followed carefully to run the PTZ camera and
respective accessories in total safety. The camera and relative accessories are called
video system
in this section.
Use the instructions correctly and fully
Read all safety rules and instructions carefully before starting to run the video system.
Follow the instructions in the instruction manual. Pay attention to all warnings on the
camera and in the instruction manual. Keep the safety notes and instructions for use for
future reference.
Attachments & Accessories
Do not use attachments other than those recommended in the instruction manual
because this could cause risks to the products. Only use the recommended accessories
for the camera for installation and operation.
Protect the video system
To protect the camera, avoid installing and using it in direct sunlight or any source of
bright light. Bright light, like that from a spotlight, can cause dimming and blurs. A vertical
line may appear on the screen. This does not indicate a problem.
Keep it away from rain and dust. Do not touch the zoom lens with your fingers. If needed,
use a soft cloth and methylated spirit to remove traces of dust. Apply a specific cap to
protect the zoom lens when the camera is not in use.
Install the camera away from video interference. The pictures could present interference
if the leads are arranged near a TV set or other device. Either move the leads or
re-install the device to solve the problem.
Do not use any part of the video system near water, i.e. bathtubs, wash basins, sinks,
tubs, on damp surfaces, near swimming pools, etc. Do not insert objects of any kind
through the camera openings to avoid touch live parts: fire and electrocution risk. Do not
pour any kind of liquid on the device.
A switch for performing maintenance operations on the camera must be included.
Connect the camera only to the electrical power supply shown on the ratings plate.
Contact your retailer if in doubt.
Lay the power wires keeping them from being trodden on or squeezed by objects placed
on top of them. Pay particular attention to leads near plugs, screws and the product
outlet.
Disconnect the power lead and the wiring to protect the camera during electrical storms
or when it is left unattended and not used for a long time. This will prevent damage to the
