TRACKING BOUNDARY
option).
Avoid background objects in the frame which could trick the motion detector,
such as blinds, gates, doors with grid and objects with very marked, contrasting
contours. A chequer board background is certainly the worst condition for
satisfactory operation.
Do not use the privacy zone function in frames where auto tracking is used: the
privacy zone can trick the auto tracking function.
Do not use the auto tracking function if the object to be tracked and/or
monitored moves too fast.
Recommended control parameters
SIZE SENS
: select
SMALL
particularly in poor lighting conditions to improve
performance.
GRAY SENS
: most false alarms are caused by the tracking of unexpected objects. For
this reason, it is preferable to select low sensitivity.
ZOOM SETTING
: it is advisable to use the lowest possible zoom values. Excessive
detail makes tracking difficult (the movement must be fastener and consequently or
the risk of loosing the object is much higher).
WAIT TIME
: particularly, in the case of poor lighting conditions or frames with
interference, it is preferable to set the lowest possible time to prevent the camera
from constantly tracking unexpected objects (e.g.
“video noise” in the frame).
TRACKING SPEED
: the
AUTO
setting should always be preferred, unless the object to
be tracked does not always move at low, constant speed.
TRACKING BOUNDARY
: it is strongly advised to delimit the tracking zone, avoiding
including unnecessary parts in the frame.
4.5.6. EVENT
In the main menu, select
<EVENT>
and the corresponding submenus to access the
menus.
50 / 56
