XtendLan HVR-1608PK, User Manual

Page: 87 / 193

78
• Used for multiple cast broadcast in limited space.
Except the above mentioned addresses of special meaning, you can use other addresses.
For example:
Multiple cast IP: 235.8.8.36
Multiple cast PORT: 3666.
After you logged in the Web, the Web can automatically get multiple cast address and add
it to the multiple cast groups. You can enable real-time monitor function to view the view.
Please note multiple cast function applies to special series only.
5.3.5.5 PPPoE
PPPoE interface is shown as in Figure 5-14.
Input
“PPPoE name” and “PPPoE password” you get from your ISP (Internet service
provider).
Click save button, you need to restart to activate your configuration.
After rebooting, DVR will connect to internet automatically. The IP in the PPPoE is the
DVR dynamic value. You can access this IP to visit the unit.
5.3.5.6 DDNS Setup
Figure 5-14
DDNS setup interface is shown as in Figure 5-15.
You need a PC of fixed IP in the internet and there is the DDNS software running in this
PC. In other words, this PC is a DNS (domain name server).
In network DDNS, please select DDNS type and highlight enable item. Them please input
your PPPoE name you get from you IPS and server IP (PC with DDNS ) . Click save
button and then reboot system.
Click save button, system prompts for rebooting to get all setup activated.
After rebooting, open IE and input as below:
http
：
//(DDNS server IP)/(virtual directory name)/webtest.htm
e.g.: http
：
//10.6.2.85/DVR _DDNS/webtest.htm.)
Now you can open DDNSServer web search page.