131
For 960H series only
Figure 7-32
Please refer to the following sheet for detailed information.
Parameter
Function
Network Mode
Includes multiple access, fault tolerance, and load balancing
Default Network
Card
Please select eth0/eth1/bond0(optional) after enable
multiple access function
Ethernet
Please select eth0/eth1 (optional).after enable multiple
access function.
Note:
The 960H series support the above three configurations and supports
functions as multiple access, fault-tolerance and load balancing.
Ethernet
Please select the network card first.
DHCP
Dynamically get IP address. You can get the device IP from
the DHCP server if you enabled this function.
TCP Port
Default value is 37777.
HTTP Port
Default value is 80.
UDP Port
Default value is 37778.
RTSP Port
Default value is 554.
Max Connection
Network user max amount. The value ranges from 0 to 20.
O means there is no user can access current device.
Remote
Host
Multiple
cast
group
#
Set MULCAST address and port.
#
Enable MULCAST function.
Summary of Contents for HVR-1608PK
