User Manual
XProHeli Silk Gimbal
Silk Gimbal
Page 5
©2014 XPROHELI. All Rights Reserved.
FPV Video
The Silk’s control box has a built in HDMI to AV composite converter
for down converting the video signal of the camera to be
transmitted over a standard 5.8ghz (or lower) FPV transmission
system. The AV output wire of the converter located on the back of
the box comes through a standard 3 pin Molex connector
compatible with almost all FPV transmitters.
Opertating Modes
The Silk has a mode function button on the bottom of the controller
that allows you to access multiple handheld operating features on
the fly. Each Silk is setup by us with the following functions:
Mode 1 - Follow Pan only
Mode 2 - Follow Pan + Pitch
Mode 3 - Set Camera angles by hand (motors turn OFF for 2
seconds, hold camera at desired angle - gimbal now holds
this angle)
Mode 4 - Lock Mode (camera remains pointed forward at
all times - does not follow hands)
Mode 5 - Customized by user in Software package
RC Control
Inputs
(Sig, +5v, Gnd)
Operation
Modes
Mode Button
HDMI
INPUT
FPV
OUTPUT
