User Manual
XProHeli Silk Gimbal
Silk Gimbal
Page 19
©2014 XPROHELI. All Rights Reserved.
Adjusting Roll & Pitch Balance
The Silk has several adjustments for the Pitch and Roll Axis:
Begin by test fitting your camera to the gimbal:
Adjust your cameras center of gravity on the pitch and roll axis by
loosening the set screws so that you can slide the assembly in the
opposite direction of the weighted side to balance the camera.
Be cautious when adjusting the left and right side pitch height
adjustment plates. The left and right side of the camera tray tube
should remain parallel and square with the back roll frame to
prevent binding of the pitch axis. If either side is uneven to one
another this can cause alignment issues.
