User Manual
XProHeli Silk Gimbal
Silk Gimbal
Page 27
©2014 XPROHELI. All Rights Reserved.
remote tilt functions are operating correctly – be sure to add this to
your pre-flight checks before take off!
To Begin find a flat clean area to do the assembly:
Single Operator:
If you want the landing gear to be locked to the airframe while in
flight (preferred for single operation) mount your yaw motor top
plate to the Silk Stand as shown:
You can mount your XPX airframe to the Silk in an upright
configuration, however we recommend mounting the Silk to the
airframe upside down to help align the Silk centered on the XPX.
Line up the two through slots on the front of the top plate and
fasten the mounting plate using the ¼-20 toggle screws to the left
and right lander pem nuts on your XPX:
Mount Gimbal
with provided ¼-
20 5/32” Hex
Note Forward
direction of Plate
