User Manual
XProHeli Silk Gimbal
Silk Gimbal
Page 30
©2014 XPROHELI. All Rights Reserved.
You can mount your XPX airframe to the Silk in an upright
configuration, however we recommend mounting the Silk to the
airframe upside down to help align the Silk centered on the XPX.
Line up the two through slots on the front of the top plate and
fasten the mounting plate using the ¼-20 toggle screws to the left
and right lander pem nuts on your XPX:
Connect your power wiring from your DC to DC down-converter
(BEC) or 3S power source and connect any desired remote tilt wires
to the control box from your receiver – This is typically setup on AUX
3 output port of your AR8000 receiver and controlled on the FLAP
switch of your DX8 radio.
Your XPX should now look like this: