User Manual
XProHeli Silk Gimbal
Silk Gimbal
Page 43
©2014 XPROHELI. All Rights Reserved.
stick is deflected, the camera starts to rotate but does not
exceed the min-max range specified. Speed is slightly
decreased near the minmax borders to yield steady
accelerations. The speed of rotation is proportional to stick
angle and the SPEED setting. RC control inversion is allowed
in both control modes.
MIN.ANGLE, MAX.ANGLE – Sets the range of angles
controlled from an RC transmitter or in Follow Mode. To
reverse the control, set the higher value first and lower value
second. For example, if you want to configure a camera to
go from leveled position to down position, set 0-90 (or 90-0 to
reverse movement).
LPF – Sets control signal filtering. The higher the value, the
smoother the reaction to stick commands. This filter avoids
fast stick movements but add commands. This filter avoids
fast stick movements but adds some reaction delay to stick
movement.
