User Manual
XProHeli Silk Gimbal
Silk Gimbal
Page 41
©2014 XPROHELI. All Rights Reserved.
Setup for 2
nd
Operator / RC Control
Connecting a RC system to the Silk is optional. Operation
with a 2
nd
operator using a RC system will allow control and
aiming of the gimbal independently from the direct physical
movements of the gimbal unit.
Several different RC protocols including standard PWM, Sum-
PWM and Futaba S-Bus are supported. Setup for each of
these control systems is slightly different in the software (for
Futaba and Sum-PWM refer to online Basecam Manual for
proper setup).
Typical 2
nd
operator setup using Normal PWM receiver:
Tilt (RC_PITCH)
Roll (RC_ROLL)
Pan (RC_YAW)
Pinout:
5v/Gnd