User Manual
XProHeli Silk Gimbal
Silk Gimbal
Page 33
©2014 XPROHELI. All Rights Reserved.
Download the SimpleBGC GUI & User Manual
SimpleBGC GUI 2_40b8.zip
SimpleBGC 32bit 2_40b8 GUI User Manual
The SimpleBGC GUI software application enables you to do the
following:
Update the firmware
Make changes to the settings of your controller
Tune settings for optimal performance
Adjust settings for various modes of operation
USING SimpleBGC GUI
After you start the software and select the correct COM port from
the list, click “Connect." When the connection is established, all
board settings and profiles will be loaded into the software. You
can re-load the current board parameters anytime by clicking the
“READ” button.
After adjusting parameters in the software, you should write them
to the controller board by clicking the “WRITE” button. Only the
current profile parameters will be saved to the board. To return to
the default settings, select the “USE DEFAULTS” button.
To choose a different profile, select it from the list of profiles located
in the upper right corner of the window. You can store different
settings as five different profiles onto the controller board. You can
switch profiles saved on the board by choosing the profile in the
software or by pressing the MENU button, if configured on your
controller board.
Remember that some settings are common for all profiles and can
not be saved on a per profile basis. Parameters such as sensor
orientation, hardware configuration, RC inputs, and motor outs are
the same across all profiles. The software starts in English. To change
the interface language, choose one in the “language” menu and
restart the program.
SAVE BACKUPS OF YOUR PROFILE SETTINGS!
The first thing you should do prior to making any adjustments or
changes to the the software is save a backup of your gimbals
Profile settings to your computer. To do this connect the gimbal to
