XP0120 Enterprise IP Phone
Using the Advanced Phone Functions
Xorcom Ltd.
42
www.xorcom.com
To configure VLAN settings via web user interface:
Click on
Network
->
Advanced
->
VLAN
to do the relating configuration. Contact your
system administrator for more information.
LLDP
The Link Layer Discovery Protocol (LLDP) is a vendor-neutral Layer 2 protocol that
allows a network device to advertise its identity and capabilities on the local network.
Enable LLDP function, the phone will go to switch to get related VLAN parameters
automatically (Synchronous with VLAN in switch).
To configure LLDP settings via web user interface:
1)
Click on
Network
->
Advanced
.
2)
Scroll to
LLDP
field, and then select
Enabled
from the pull-down list of
Active
.
3)
Enter the corresponding packet interval in the
Packet Interval
field.
4)
Click
Confirm
to save the change.
HTTPS
This IP phone can support HTTPS (Hypertext Transfer Protocol over Secure Socket
Layer). Adding SSL layer under HTTP, in short, it is a security version of HTTP. Users can
set this transmission mode via web page.
To configure HTTPS settings via phone user interface:
1)
Press
Menu
->
Settings
->
Advanced Settings
.
2)
Enter the password required, scroll to
Network
and then press the
Enter
hot key.
3)
Scroll to
Webserver Type
and then press the
Enter
hot key.
4)
Press the navigation keys or
Switch
hot key to select the transmission mode.
5)
Press the
Save
hot key to save the change or
the
Back
hot key to cancel.
To configure HTTPS settings via web user interface:
1)
Click on
Network
->
Advanced
->
WebServer
.
2)
Scroll to
WebServer
field, and then select the desired transmission mode from the
pull-down list of
Type
.
