XP0120 Enterprise IP Phone
Using the Advanced Phone Functions
Xorcom Ltd.
40
www.xorcom.com
TLS
TLS(Transport Layer Security), an IETF standards track protocol(RFC 5246), was based
on the earlier SSL specifications developed by Netscape Corporation.
If you make a call based on TLS and SRTP (Set the transport as TLS and the SRTP as
On), the IP phone UI will display the connecting and ring back interface. If the reception
also set the transport as TLS, then IP phone UI will display the icon on both sides.
To configure TLS via web user interface:
1)
Click on
Account
->
Basic
.
2)
Select the desired account from the pull-down list of
Account
.
3)
Select
TLS
from the pull-down list of
Transport
.
4)
Click
Confirm
to save the change.
DNS-SRV
If the SIP server cannot be used, the phone will be connected on the server which is
available.
To configure DNS-SRV via web user interface:
1)
Click on
Account
->
Basic
2)
Select
DNS-SRV
from the pull-down list of
Transport
.
3)
Click
Confirm
to save the change.
Network Setting
PC Port Setting
Refer to
Configuration and Registration
for the basic network WAN setting
information. The following table lists the instructions of the field about the network PC
port setting.
Field Name
Description
As Bridge
If you select the Bridge mode, then the two Fast Ethernet ports will
be transparent.
As Router
If you select the Router mode, the SIP phone will work as a router
IP address
User could configure the PC port IP address.
DHCP Server
If you set the DHCP server on, the device connected to the PC port
will get the IP address automatically between the start IP address
and the end IP address. But if you select the bridge mode, the DHCP
server cannot work.