XP0120 Enterprise IP Phone
Using the Basic Call Functions
Xorcom Ltd.
31
www.xorcom.com
Call Completion
Have you encountered such a situation? When you call a contact, but the other side is
busy on a call. Do you want the server to inform you immediately when the contact
ends the call in order to establish a conversation in time? Call Completion can help you
to solve this problem.
To enable Call Completion via phone user interface:
1)
Press
Menu
->
Features
->
Call Completion
.
2)
Press the navigation keys or
Switch
hot key to select
Enable
from the
Call
Completion
field.
3)
Press the
Save
hot key to save the change.
Answering a Call
Answering an Incoming Call
1)
If you are not on an active call, lift the handset to answer it using the handset, or
press to answer it using the speakerphone, or press to answer it using
the headset.
2)
If you are on an active call, the LCD will prompt:
Incoming Call
：
xxx
. Press the
Answer
hot key to answer the new call, or the
Reject
hot key to refuse it.
During the conversation, you can alternate between the Headset, Handset and
Speakerphone modes by pressing the corresponding key or picking up the handset.
Denying an Incoming Call
Press the
Reject
hot key or
X
key to deny the incoming call directly.
DND
Press DND hot key to active DND Mode. Further incoming calls will be rejected and the
LCD will display the
icon. Press DND hot key again to deactivate DND mode. You can
find the incoming call record in the Call History.
To activate DND mode via phone user interface:
Press DND hot key when the phone is idle.
To deactivate DND mode via phone user interface:
Press DND hot key again to deactivate the DND mode.
