www.sahabtec.com
Page18
XonTel S200 Administrator's Guide
·
PPPoE
If your DSL provider says that you are connecting through PPPoE or if you
Normally enter a user name and password to access the Internet, perform
these Steps:
Step1: Select
PPPoE
as the WAN Connection
Type. Step2: Enter the User Name.
Step3: Enter the Password.
Step4: Click the
Save
button to save the settings.
Step5: Reboot the device.
Step6: Check the WAN’s Status (Status
Network status)
5.1.3
DHCP Server
Dynamic Host Configuration Protocol (DHCP) is a network protocol that enables
a server to automatically assign an IP address to a computer from a defined
range of numbers (i.e., a scope) configured for a given network. You can set a
local network NTP server for XonTel PBX here too
Note: XonTel S200 PBX can be working as a DHCP server, but cannot be
regarded as a router.
Figure 5-3