www.sahabtec.com
Page37
XonTel S200 Administrator's Guide
Once enabled, the voicemail will be sent to the below email address as
an attachment.
·Send Voicemail to Email Address
This option defines whether or not voicemails/Fax is sent to the Email address
as an attachment.
Note
: Please ensure that all voicemail settings are properly configured on the
System Settings -> Voicemail Settings page before using this feature.
4)
Flash
·Hook Flash Detection
Sets the amount of time, in milliseconds that must pass since the last hook-
flash event received by XonTel PBX before it will recognize a second event. If a
second event occurs in less time than defined by Hook Flash Detection, then
XonTel PBX will ignore the event. The default value of Flash is 1000ms, and it
can be configured in 1ms increments.
5)
Group
·Pickup Group
If this extension belongs to a pickup group, any calls that ring this extension can
be picked up by other extensions in the same pickup group by dialing the Call
Pickup feature code (default *4).
Note
: *4 is the default setting, it can be changed under Feature Codes ->
General -> Call Pickup.
6)
Other options
·
Call Waiting
Check this option if the extension should have Call Waiting capability. If
this option is checked, the ‘When busy’ follow me options will not be
available.
·
DND
Don’t Disturb.
·User Web Interface
Check this option to allow the user to login to the XonTel XONTEL PBX User
Web interface, which can be used to access voicemail and extension
recordings. Users may login to the XonTel PBX User Web interface by using their
extension number and voicemail PIN # as the login and password
respectively.
·
Ring Out
Check this option if you want to custom the ring time. Tone will stop over the