www.sahabtec.com
Page15
XonTel S200 Administrator's Guide
5.
System
Click
to access.
In this page, we can configure the network settings, firewall settings, storage
management and some other preferences like firmware update and hot
standby.
5.1
Network Preferences
5.1.1
LAN Settings
Figure 5-1
·
DHCP
If this option is set, XonTel PBX will use DHCP to get an available IP address
from your local network. Not recommended or you cannot access XonTel PBX
without the right IP address
·
Enable SSH
This is the advance way to access the device, you can use the putty software to
access the device. In the SSH access, you can do more advanced setting and
debug, it’s disabled by default.
·
Port
: the default is 8022, you change it to another one
·
Hostname
: Set the host name for
XonTel
PBX.
