XonTel Technology S200 User Manual Download Page 31

Page: 31 / 117

www.sahabtec.com

Page31

XonTel S200 Administrator's Guide

5.3.5

Backup and Restore

We can backup up the configurations before reset XonTel PBXS200 to factory
defaults, and then restore it using this package.

Note:

Only configurations, custom prompts will be backed up, the voicemail and
recording files are not included.

When you have updated the firmware version, it’s not recommended to
restore using old package.

Figure 5-16

5.3.6

Reset and Reboot

We can reset or reboot XonTel PBX S200 via web directly in this page.

Figure 5-17

Reboot System

Warning

Rebooting the system will terminate all active calls!

Reset to Factory Defaults

Warning

: A factory reset will erase all configuration data on the system.

Please do not turn off the system until the RUN light begins blinking. Any power

Summary of Contents for S200






















































































































Search results

Summary of Contents for S200

Reviews:

Related manuals for S200

Brands by name

Popular brands

XonTel Technology S200, User Manual

Search results

Summary of Contents for S200

Reviews:

Related manuals for S200

Brands by name

Popular brands