www.sahabtec.com
Page39
XonTel S200 Administrator's Guide
7)
Follow me (Call Forwarding)
This function sets inbound call forwarding on an extension. An administrator can
configure Follow Me for this extension
8)
Volume Settings
Rxgain: The Volume sent to FXS extension.
Txgain: The Volume sent out by the FXS extension
9)
Mobility Extension
XonTel PBX allows you to use your mobile phone as extension. If you set your
mobile phone as mobility extension and then you call XonTel PBX with this
mobility phone, you will hear a dial tone. XonTel PBX will recognize your call as
a call from an extension. You can dial the number of other extensions (Your
caller ID will be the number of your extension) or dial out via outbound routes
just like dialing from your extension.
Note
: If callback is enabled in the inbound route, the mobility extension
function of this inbound route will be disabled
10)
Spy Settings
XonTel PBX allows extension to monitor/barge in other conversation. Once this
feature is enabled, the extension has the ability to monitor/barge in other calls
using the feature codes for each spy mode, refer to 'Feature Codes' page for
more information.
·
spy modes
There are 3 spy modes available for choice:
Normal spy: you can only hear the call, but can't talk
Whisper spy: you can hear the call, and can talk with the monitored extension
Barge spy: you can hear the call and talk with them both
Note
: for example,if 500 want to monitor extension 501, we need to enable the
'allow being spied ' for 501, and choose the spy mode for extension 500.
Then pick up 500 and dial “feature codes + 501” to start monitoring when 501
is in a call
