XO FLOW – Installation instructions
63
Figure 93 – Adjusting the friction in the middle joint using a 4 mm Allen key
Figure 94 – Adjusting the friction brake of the Navigator using a 5 mm Allen key
6.5
Start-up the unit
Switch the unit on and check that water flows into the mixing cups. Wait 5 minutes for the internal
water container to be filled.
Lift the syringe forward and activate water until water path is free of air. Activate all water bearing
instruments until their water paths are free of air.
6.6
Check software version
Check that the newest software version is installed.
See information about software versions here.