XO FLOW – Installation instructions
10
Condition
Operation
Installation altitude
Max. 2,000 meters
above sea level
2.5
External equipment
When external equipment is connected to the XO FLOW unit to create a medical electrical
system, the requirements of IEC 60601-1, 3
rd
edition, must be complied with.
The external equipment must also comply with the applicable standards, e.g.:
•
IEC 60950-1 (information technology equipment) or IEC 62368-1 (electronic equipment
within the field of audio, video, information and communication technology), and
•
IEC 60601-1 (medical electrical equipment)
It is the responsibility of the person/organization installing and/or modifying the equipment
to ensure that the system conforms to applicable legislation, e.g. Directive 93/42/EEC, or
Regulation (EU) 2017/745, and the requirements of IEC 60601-1, 3
rd
edition.
3
NECESSARY DOCUMENTATION AND TOOLS ETC.
The following is necessary for installing and adjusting XO FLOW:
3.1
Documentation etc.
•
Installation drawing, 1:20 (YC-002)
•
Installation drawing, 1:1 (YC-001)
3.2
Standard tools
•
Hammer drill for at least 18 mm concrete drill bit (SDS-system recommended)
•
Carbide drill bit for concrete 18 mm (SDS-system)
•
Carbide drill bit for concrete 10 mm (SDS-system)
•
Wood bit 6 mm and 8 mm
•
Spirit level 20 – 30 cm
•
Combination wrench 17, 19 and 22 mm
•
Socket spanner with extension 19 mm
•
Torx screwdrivers: T6, T8, T10, T15, T20, T25, T30 and T40
•
Pozidrive screwdriver: PZ 1-2-3
•
Allen key set: 1,5 – 10 mm
•
Digital multi-meter
3.3
Special tools supplied with unit
•
Special wrench (MG-416)
3.4
Necessary special tools available from XO CARE A/S
•
Manometer, four holes (ISO 9168:2009, type 3) – for adjustment and control of drive air pressure
to air instrument (turbine) (FA-041)
•
Four carrying handles for the unit stand (AN-181)
•
Flowmeter – for adjustment and control of cooling air for motor (FA-400)
•
Antistatic wristband (UC-600)
•
Drill template 1:1 (AP-919)
3.5
Other special necessary tools and materials
•
Torque wrench 75 Nm
•
Two component flame retardant foam: Würth part nr 0893 303 200