manualshive.com logo in svg

Xilinx LogiCORE IP AXI, Product Manual, Page: 82 / 107

Share
Download
Xilinx LogiCORE IP AXI Product Manual Download Page 82

AXI Bridge for PCI Express v2.4

www.xilinx.com

82

PG055 June 4, 2014

Chapter 5: 

Example Design

Vivado Simulator

By defaults, the simulator is set to Vivado simulator. To run a simulation, click 

Run 

Behavioral Simulation

 in the Flow Navigator.

Cadence IES

For a Cadence IES simulation, the following steps are required:

1. Run the following command in Vivado Tcl console of the example project to create an 

IES environment:

export_simulation -lib_map_path /proj/xbuilds/2013.3_daily_latest/clibs/ius/

12.20.016/lin64/lib/ -simulator ies -directory ncsim

2. Go to 

ncsim

 directory on the terminal, and run the 

./board_sim_ies.sh

 command.

Mentor Graphics Questa SIM

For a Questa SIM simulation, the following steps are required:

1. In the Vivado IDE, change the simulation settings as follows:

°

Target simulator: 

QuestaSim/ModelSim

2. On the Simulator tab, select 

Run Simulation > Run behavioral simulation

.

VCS Simulator

For a VCS simulation, the following steps are required:

1. In the Vivado Tcl console, enter

 set_param 

ips.useProjectLanguageSubcoreFileDiscovery "true"

2. In the Vivado Sources Tab, select 

AXI_BRAM_CTRL IP > Reset Output Products > 

Generate Output Products

.

3. Run the following command in Vivado Tcl console of the example project to create a VCS 

environment:

export_simulation -lib_map_path /proj/xbuilds/2014.1_daily_latest/clibs/vcs/

H-2013.06-3/lin64/lib/ -simulator vcs_mx -force -directory vcs_mx

4. Go to the 

vcs_mx

 directory on the terminal, and run the 

./board_sim_vcs_mx.sh

 

command.

IMPORTANT: 

Simulation is not supported for configurations with the Silicon Revision option set to IES. 

Only implementation is supported.

Send Feedback

Summary of Contents for LogiCORE IP AXI












































































































Reviews:

No comments