Figure 13: B2B Assembly with Samtec JSOM Standoffs
DETAIL A
SCALE 3.000
JSOM-0515-01 Standoff
Assembly
JSOM-Nuts
JSOM-Jack Screw
JOSM-Base
Connector ADF6-60-03.5-L-4-2-A
on SOM
Connector ADM6-60-03.5-L-4-2-A
on Carrier Card
X25311-041621
A recommended best practice is to put board-to-board alignment arrows on your carrier card
silkscreen to aid in the orientation of the SOM to carrier card. It is important to check the
connector alignment key positions before gently pressing down to fully engage the B2B
connectors.
Chapter 3: Mechanical Design Considerations
UG1091 (v1.0) April 20, 2021
Carrier Card Design for Kria SOM
51