![background image](http://html1.mh-extra.com/html/xilinx/kria-k26-som/kria-k26-som_design-manual_3372861041.webp)
Figure 3: K26 SOM Samtec Connector Position Tolerance
Carrier Card Board to Board Connector
Placement Guideline
Corresponding to the Samtec 0.635 mm AcceleRate HD connectors (ADF6–60–03.5–L–4–2–A)
on the SOM, the mating connectors (ADM6–60–03.5–L–4–2–A) are placed on your carrier card.
The two SOM mating connectors must be placed and positioned using a tightly controlled design
and manufacture processing. The following figure shows the keep-out area and connector
position tolerance information used on an example carrier card design. The keep out area defined
maximum component height is 1.0 mm.
Chapter 3: Mechanical Design Considerations
UG1091 (v1.0) April 20, 2021
Carrier Card Design for Kria SOM
41