Xicom XTU-400K, Operation And Installation Manual

Page: 80 / 189

MNC-0400-001 20 of 54 Revision G
Operation, Rack and Digital HPAs
There are five setup menus, Setup Menu 1, Setup Menu 2,
Setup Menu 3, Setup Menu 4, and Setup Menu 5. A special
function key [ Setup ] is used to access the setup menus. Two
keys, [ Enable ]+[ Setup ], are pressed to access the Setup
Menus when [ Enable ] is set to ON.
Setup Menu 1
Setup Menu 1 , Figure 8 is an intermediate menu. All four
softkeys of the Setup 1 Menu are active. The Setup 1 Menu
softkey functions are:
[Softkey 1]— Pressed to access the Default 1 Menu
[Softkey 2]— Pressed to access the Alarms/Faults Menu .
[Softkey 3]— Pressed to access the Test Menu.
[Softkey 4]— Pressed to access Setup Menu 2.
Figure 8, Setup Menu 1
Default Menus
There are two default menus, Figure 9 that allow you to set the
default parameters for the amplifier.
Default Menu 2 is accessed
from Default Menu 1 .
Default Menu 1
The functions controlled by the Default 1 Menu are listed in the
menu. All four softkeys are active. The Default 1 Menu softkey
functions are: