STEP 1
1. Please note that this treadmill need
at least 2 people to finish assembly.
2. Open the carton box, and take out all
the protection foam and assembly
parts.
3. As the photo shows, take out the
running deck from the box, lay it on the
flat floor, and then cut the belt.
STEP 2
1. Lift up the left upright (2) and use the
6# wrench (15) to fasten the left upright
(2) with 1 pc M10x50 bolt (8) , 1 pc
M10x20 bolt (9) and 2 pcs M10 washer
(12).
Do the same for the right upright (3).
STEP 3
1. Connect the cable extent from
console (4) with the cable extent from
right upright (3).
Pay attention to the connection of the
cable, a wrong connection would caused
damage of the connector.
2. Use the 5# wrench (16) to fasten the
console (4) onto the left & right upright
with each 2pcs M8x15 bolt (10) and 2
pcs M8 washer (13).
Then fasten all the bolts tightly.
5
ASSEMBLY INSTRUCTIONS