XFit HERMES User Manual Download Page 25

 

 

 

 

 

 

 

 

 

 

 

 

TERMS OF WARRANTY 

  Warranty period is 2 years for motor, 2 years for electrical / electronic parts and 5 years for 

the metal frame. 

  X-TREME STORES S.A. undertakes to repair the machine free of charge in the event of 

damage due solely to a manufacturing fault. The warranty covers the cost of the spare 

parts. Replacement of spare parts or not is up to the company technicians. The customer is 

responsible for the control and adjustment of the machine. 

  This warranty note is only valid if it is accompanied by legal proof of purchase (invoice or 

retail receipt). The warranty period is not extended for any reason and the transfer of it to a 

third party is excluded. 

  Any damage is repaired as soon as possible and any claim for damages due to lack of 

spare parts and delay in repairing the damage is excluded. The costs of transporting the 

machine to or from the dealership will be borne by the customer after 6 months of 

purchase. 

  The warranty conditions are set by the manufacturers of machinery and are governed by 

European regulations. 

  Upon expiry of the warranty, any replacement part is covered by a 6-month warranty. 

 

THE WARRANTY SHALL NOT APPLY: 

  When the machine is used for any purpose other than home use (gyms, clubs, institutes, 

hotels, studios, etc.). 

  When the lubrication of the walking belt is insufficient or is more than specified by  the 

instructions for use. 

  When the fault is the result of misuse, alterations, poor connection, poor maintenance, 

voltage fluctuations in the PPC network. 

  Components damaged by user fault such as broken plastic parts, damaged belt with 

improper adjustment, incorrect or incomplete lubrication, damage when moving the 

machine. 

  Components such as the walking belt and side steps are considered consumables and are 

covered by a 6-month warranty.. 

  When the machine is opened or repaired by third parties. 

  When the damage is caused by the buyer's negligence & the instructions for use have not 

been followed. 

  When the machine is outdoors or exposed to sun or dust. (Dust and lint on the inside of the 

machine (motor roller) cause serious damage. Keep the machine clean!). 

  When electronic components (console) are damaged by intense sweating or other liquid 

that has come into contact with or penetrated inside them. 

 

 

Tel.:

 210 66 20 921 -2 – 

Fax:

 210 66 20 923 –

e-mail

[email protected]

 

 

 

 

 

Summary of Contents for HERMES





























Reviews: