Xerox WorkCentre M15 Page 151 User Manual Download

Page: 151 / 181

Xerox WorkCentre M15/M15i User Guide

Page 11-5

roubl

otin

Paper Jams

If paper jams occur, ‘PAPER JAM’ appears in the display. Follow the steps below to clear jam.
To avoid tearing paper, pull the jammed paper out gently and slowly.

Paper Feed Area

If jammed in the paper feed area, ‘PAPER JAM 0’ appears in the display.

Remove the paper cassette.

After pulling it out completely, lift
the front part of the cassette
slightly up to release the cassette
from the machine.

Remove the jammed paper by
gently pulling it straight out.

If there is any resistance, and
the paper does not move
immediately when pulled, stop
pulling and go to the next step.

Summary of Contents for WorkCentre M15






















































































































































































Search results

Summary of Contents for WorkCentre M15

Reviews:

Related manuals for WorkCentre M15

Brands by name

Popular brands

Xerox WorkCentre M15, User Manual

Search results

Summary of Contents for WorkCentre M15

Reviews:

Related manuals for WorkCentre M15

Brands by name

Popular brands