Xerox WorkCentre 7132, System Administration Manual

Page: 80 / 184

6 UNIX TCP/IP
80 Xerox WorkCentre 7132 System Administration Guide
1) Type
su
to access the superuser mode.
2) Type
sh
to run the Bourne shell.
3) Type
lpshut
to stop the print service.
4) Type the following command on one line:
lpadmin -pqueuename -v/dev/null -mrmodel -ocmrcmodel-
osmrsmodel -ob3 -orc -ormhostname -orplp
NOTE: The queuename is the name of the print queue being created. The hostname
is the
PrinterName
for the machine from the etc/hosts file.
The remote queue name must be set to
lp
to spool jobs to the machine. This is set by
the
-orplp
command.
2.
Type
lpsched
to start the print service.
3.
Type
enable queuename
to enable the queue to print to the machine.
4.
Type
accept queuename
to enable the queue to start accepting jobs from the
HP-UX workstation.
NOTE: The queuename is the name of the print queue that has been created.
5.
Type
exit
to exit the Bourne shell.
6.
Type
exit
to exit superuser mode.
7.
Type
exit
to close the command window.
8.
Continue with Test Print on page 81 .
Using the System Administrator Manager (SAM) GUI Method
Follow the steps below to use the HP System Administrator Manager (SAM) GUI
(Graphical User Interface).
NOTE: Refer to the HP-UX documentation for additional information on using the
System Administrator Manager (SAM).
1.
Start the SAM application.
2.
Select the [Printers and Plotters] icon.
3.
Select [Actions] from the Menu Bar.
4.
Select [Add Remote Printer/Plotter] form the pull-down menu.
5.
Enter the following information into the form displayed in the [Add Remote Printer/
Plotter] dialog box:
1) Printer Name
2) Remote System Name
3) For the Remote Printer Name, enter “lp”.
NOTE: The Printer Name is the name of the print queue being created. The Remote
System Name is the PrinterName for the machine from the etc/hosts file.
The Remote Printer Name must be set to lp to spool jobs to the machine.