Xerox WorkCentre 7132, System Administration Manual

Page: 73 / 184

Xerox WorkCentre 7132 System Administration Guide 73
6 UNIX TCP/IP
This chapter explains how to set up the machine to operate in a UNIX TCP/IP
environment. The UNIX Workstation Operating Systems (OS) supported are Solaris,
SunOS, and HP-UX. The following information is provided.
Information Checklist – page 73
UNIX TCP/IP Environments – page 74
UNIX TCP/IP Installation – page 74
Installation Procedure – page 74
Network Communication Setup – page 75
Workstation Setup – page 76
Test Print – page 81
Printing – page 81
Solaris/HP-UX – page 81
SunOS – page 83
Printer Status – page 85
Solaris/HP-UX – page 85
SunOS – page 86
-C Option – page 87
Information Checklist
Before installing the UNIX TCP/IP features on the machine, make sure that the
following items are available or have been performed.
Item By
An existing operational network utilizing a UNIX TCP/IP protocol is
required. These steps are not designed to install the UNIX TCP/IP
network. Customer
SunOS 4.1x, Solaris 1.x, 2.x, 7.x, 8.x, 9.x, 10.x, HP-UX 9.x, 10.x, 11.x Customer
Make sure that the correct IP Address is being used for the machine. Customer
Make sure that the Gateway Address is set correctly. Customer
Make sure that the Subnet Mask is set correctly. Customer
Make sure that the Host Name is set correctly. Customer
Test the copy and fax features of the machine, to make sure that they are
installed fully and functioning correctly. Customer