Xerox WorkCentre 7132, System Administration Manual

Page: 61 / 184

Using CentreWare Internet Services to Configure Settings on the Machine
Xerox WorkCentre 7132 System Administration Guide 61
SMTP
Server Settings:
• Server Address – Enter the SMTP server address. Up to 128 characters can be
entered, including . (period) and - (hyphen).
• Port Number – Specify the SMTP port number.
• Send Authentication – Select whether and how users are required to
authenticate before sending e-mail using an SMTP server.
• User Name – Specify the user ID for SMTP authentication.
• Password – Specify the password for SMTP authentication.
Outgoing Mail Settings:
• Maximum E-mail Size – Allows you to specify the maximum e-mail size.
• Max. No. of Pages for Split Send – Allows you to set the size of outgoing e-mail
in pages.
POP3
Server Settings:
• Server Address – Enter the POP3 server address. Up to 128 characters can be
entered, including periods (.) and hyphens (-).
• Port Number – Specify the POP3 port number.
• POP Receive Authentication – Select to enable APOP authentication.
• User Name – Enter the POP user address.
• Password – Enter the POP user password.
Incoming Mail Settings:
• POP3 Server Check Interval – Enter the interval to check the POP3 server
between 1 and 120 minutes in 1 minute increments.
5.
Select [Apply] to reflect the new setting.
6.
Enter the user ID and password then select [OK].
NOTE: The default user ID is "11111" and the default password is "x-admin".
7.
When the reboot message appears, select [Reboot Machine].
NOTE: For more information about the contents of items, refer to the CentreWare
Internet Services chapter of the User Guide.