Xerox WorkCentre 7132, System Administration Manual

Page: 19 / 184

Modes
Xerox WorkCentre 7132 System Administration Guide 19
There are five Ethernet interface options available on the touch screen: Auto,
100BASE-TX (Full Duplex), 100BASE-TX (Half Duplex), 10BASE-T (Full Duplex), and
10BASE-T (Half Duplex). 10BASE-T and 100BASE-TX support 10 Mbps and 100
Mbps respectively. When AUTO is selected, the machine detects the communication
speed automatically when powered on and adjusts its settings accordingly.
EtherTalk, NetWare, and TCP/IP protocols that use Ethernet can be switched
automatically according to the applied transmission protocol.
NOTE: EtherTalk will function when the optional PostScript Kit is installed.
Modes
Use the mode buttons to access the screens which allow you to select features, monitor
the status of jobs and obtain general information on the machine.
There are four buttons on the machine.
• All Services
• Features
• Job Status
• Machine Status
NOTE: These buttons do not respond when the machine is in the System Settings
mode.
All Services
Use this button to access all the services available on the machine.
NOTE: The arrangement of service icons displayed on the screen can be changed by
the Key Operator.
1.
Press the <All Services> button
on the control panel.
<Features>
button
<Job Status>
button
<Machine Status> button
<All Services>
button