Xerox WorkCentre 7132 System Administration Manual Download Page 101

Page: 101 / 184

SMB Installation

Xerox WorkCentre 7132 System Administration Guide

101

Workstation Setup

Install the print driver on the NetWare client computer. Refer to the HTML document in
PCL Print Driver CD-ROM.

Test Print

Make sure that the machine has been installed on the network correctly by submitting
a test print from a client workstation. Perform the following steps.

Open a document on a client workstation.

Select the machine as the printer.

Print the document on the machine and verify that it prints correctly.

Make sure that the print driver is installed on every workstation that will be sending
jobs to the machine.

Repeat the test for all workstations that will be sending jobs to the machine.

The installation process is now complete.
If the test print fails, refer to

the Problem Solving chapter

for assistance.

Summary of Contents for WorkCentre 7132

























































































































































































Search results

Summary of Contents for WorkCentre 7132

Reviews:

Related manuals for WorkCentre 7132

Brands by name

Popular brands

Xerox WorkCentre 7132, System Administration Manual

Search results

Summary of Contents for WorkCentre 7132

Reviews:

Related manuals for WorkCentre 7132

Brands by name

Popular brands